We laser cutted the solar cell for your to DIY you own solar house. All the solar cell will be sorted and tested before delivery.100% power output as we declared in the following.We test solar cell by sun simulator, the very precise testing facility for your power output essurance!                                                                                                 These are  Multi Solar cell B Grade with small minor cosmetic defect. 6"x6", 3 bus bar multi-crystal solar cells. 

specification: Average Power (Watts): 4 Wp 
Average Current (Amps):10 Imax 
Average Voltage (Volts): 0.5 Vmax 

Gauge:0.12mm
Width: 2mm
T of copper : 0.1mm
T of Tin : 0.03mm
Width range: ± 0.1
Thickness error: ± 0.01
Pre-tinned = NO SOLDER needed

Thickness:0.2mm
Width: 5mm
T of copper : 0.15mm
T of Tin : 0.03mm
Width range: ± 0.1
Thickness error: ± 0.01
Pre-tinned = NO SOLDER needed

NO CLEAN FLUX PEN
No lead for environment friendly
Can be refilled
 
No hurt of your skin
Easy your solar panel DIY
It is fun to use
 
Application:
SOLAR CELL TABBING AND BUS WIRING
PCB board soldering
Electrical repairing
AND MANY OTHER SOLDERING USES 
Educational kit

Solar cable
Product advantages
For moveable, suspended or fixed installation in photovoltaic systems at temperatures ranging from -40°c to +120°c  For use indoors,outdoors,in explosive areas, and in industrial,commercial, and agricultural applications
Suitable for use inside and connected to insulated equipment(protection class II)
Max.ambient temperature up to +120°c (moveable and fixed)
Designed according to IEC 60216:constant temperature 120°c=20.000h(=2.3years),constant temperature max.90°c=30years
VDE-tested(VDE reg.no.8026)
TUV 2 PfG 1169/08.2007.cert.no.R60014271
Ammonia resistance
UV and ozone resistant
Pollution-and halogen-free
Improved fire-resistant performance
Protected against short circuits and ground leakages

anti-aging, anti-UV
reverse flow protection by high quality diode
Comes with rubber seal ring(the red one on the lid) for water tight sealing
Material is designed to endure extreme temperatures without warping or cracking
IP65
Built-in cable insert sealer
Easy installation
No screw, easy open easy fasten
Good heat sinking to withstand high temperature
Suitable for 50W-150W solarpanel                                                                                                                                           

Dimensions: 107mm * 90mm * 22mm
Maximum voltage: 1000V
Rated current: 5A-8A
Temperature: -40 °c~ +85°c

Security Level: Class 

Waterproof Grade: IP65
Connection cable specifications: 2.5mm2  4mm2Installation torque: 1.5MN